Description
The VL Flex 52 - J1939 supports input from analog sensors as well as J1939 and LIN 2.0.
Specifications
- Input supply voltage : 8-32 V
- Nominal voltage : 12V|24V
- Consumption : 50mA
- Liquid type : Fuel
- Connectivity : J1939|NFC
- NMEA2000 outputs : No
- LIN inputs : 1x
- Analogue input type : Resistive (Ω)|Frequency (Hz)|LIN Bus
- Resistive signal inputs (Ω) : 1x
- Frequency signal inputs (Hz) : 1x
- Temperature range : 40-120°C/105-250°F|50-150°C/120-300°F|+50°C/+120°F|120°C/250°F|150°C/300°F|250°F/120°C|900°C/1650°F|100-900°C
- RPM range : 3000rpm|4000rpm|5000rpm|6000rpm|7000rpm|8000rpm
- Pressure range : 2BAR/30PSI|5BAR/80PSI|10BAR/150PSI|25BAR/350PSI|30BAR/435PSI|150PSI/10BAR|400PSI/25BAR
- Connector type : Hirschmann 8pin
- Color : White|Black
- Diameter : 52mm
Analog connectivity
The supported analog inputs allow you to directly read from your engine sensors.
Frequency input:
Engine RPM sensors and Speed sensors
Resistive input:
Tank level, Temperature, Pressure, Rudder and Trim sensors
Digital network connectivity
The CAN interface expands this possibility by allowing the device to read from the digital network.
Lin connectivity:
Intelligent battery sensor
Can port:
NMEA 2000 or SAE J1939
NFC interface:
Contactless device configuration
Contactless configuration
- Device configuration via smartphone companion app
- Setup your device with the user-friendly app
- "Tap" the smartphone onto the instrument lens to configure it instantly
Package content:
1x VL Flex J1939
1x 52 mm Mounting Spinlock
1x 8-pole cable
1x Safety instructions