Orders placed between 20/12/2023 and 06/01/2024 will be processed from 07/01/2024. Happy Xmas Holidays!

Veratron / VDO

ViewLine Flex 52 J1939 Gauge

SKU: -
Choose Color variant
Add to Cart
Years Warranty
Official Distributor

Description

The VL Flex 52 - J1939 supports input from analog sensors as well as J1939 and LIN 2.0.

Specifications

  • Input supply voltage : 8-32 V
  • Nominal voltage : 12V|24V
  • Consumption : 50mA
  • Liquid type : Fuel
  • Connectivity : J1939|NFC
  • NMEA2000 outputs : No
  • LIN inputs : 1x
  • Analogue input type : Resistive (Ω)|Frequency (Hz)|LIN Bus
  • Resistive signal inputs (Ω) : 1x
  • Frequency signal inputs (Hz) : 1x
  • Temperature range : 40-120°C/105-250°F|50-150°C/120-300°F|+50°C/+120°F|120°C/250°F|150°C/300°F|250°F/120°C|900°C/1650°F|100-900°C
  • RPM range : 3000rpm|4000rpm|5000rpm|6000rpm|7000rpm|8000rpm
  • Pressure range : 2BAR/30PSI|5BAR/80PSI|10BAR/150PSI|25BAR/350PSI|30BAR/435PSI|150PSI/10BAR|400PSI/25BAR
  • Connector type : Hirschmann 8pin
  • Color : White|Black
  • Diameter : 52mm
Single or dual layout presentation
Single or dual layout presentation
Wheel speed, Engine Load, Fuel Level, Oil Level, Oil Pressure, Boost Pressure, Coolant Pressure, Coolant Temperature, Battery Current, Brake Pressure, Gear Oil Level, Gear Oil Pressure, Battery Potential, Air Temperature, Exhaust Temperature, Oil Temperature, Gear Oil Temperature, Fuel Rate, Fuel Economy, Engine Speed, Odometer, Engine Hours, Total Fuel, Clock, DEF/BLUE Level, Battery SOC/SOH, Battery, Temperature, Battery Autonomy
banner

Analog connectivity


The supported analog inputs allow you to directly read from your engine sensors.



Frequency input:

Engine RPM sensors and Speed sensors


Resistive input:

Tank level, Temperature, Pressure, Rudder and Trim sensors

Digital network connectivity


The CAN interface expands this possibility by allowing the device to read from the digital network.



Lin connectivity:

Intelligent battery sensor


Can port:

NMEA 2000 or SAE J1939


NFC interface:

Contactless device configuration

banner
banner

Contactless configuration


  • Device configuration via smartphone companion app
  • Setup your device with the user-friendly app
  • "Tap" the smartphone onto the instrument lens to configure it instantly


Package content:

1x VL Flex J1939

1x 52 mm Mounting Spinlock

1x 8-pole cable

1x Safety instructions

banner
104,03 €
Add to Cart